%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% AGUJournalTemplate.tex: this template file is for articles formatted with LaTeX
%
% This file includes commands and instructions
% given in the order necessary to produce a final output that will
% satisfy AGU requirements, including customized APA reference formatting.
%
% You may copy this file and give it your
% article name, and enter your text.
%
%
% Step 1: Set the \documentclass
%
%
%% To submit your paper:
\documentclass[draft]{agujournal2019}
\usepackage{url} %this package should fix any errors with URLs in refs.
\usepackage{lineno}
\usepackage[inline]{trackchanges} %for better track changes. finalnew option will compile document with changes incorporated.
\usepackage{soul}
\linenumbers
%%%%%%%
% As of 2018 we recommend use of the TrackChanges package to mark revisions.
% The trackchanges package adds five new LaTeX commands:
%
% \note[editor]{The note}
% \annote[editor]{Text to annotate}{The note}
% \add[editor]{Text to add}
% \remove[editor]{Text to remove}
% \change[editor]{Text to remove}{Text to add}
%
% complete documentation is here: http://trackchanges.sourceforge.net/
%%%%%%%
\draftfalse
%% Enter journal name below.
%% Choose from this list of Journals:
%
% JGR: Atmospheres
% JGR: Biogeosciences
% JGR: Earth Surface
% JGR: Oceans
% JGR: Planets
% JGR: Solid Earth
% JGR: Space Physics
% Global Biogeochemical Cycles
% Geophysical Research Letters
% Paleoceanography and Paleoclimatology
% Radio Science
% Reviews of Geophysics
% Tectonics
% Space Weather
% Water Resources Research
% Geochemistry, Geophysics, Geosystems
% Journal of Advances in Modeling Earth Systems (JAMES)
% Earth's Future
% Earth and Space Science
% Geohealth
%
% ie, \journalname{Water Resources Research}
\journalname{Enter journal name here}
\begin{document}
%% ------------------------------------------------------------------------ %%
% Title
%
% (A title should be specific, informative, and brief. Use
% abbreviations only if they are defined in the abstract. Titles that
% start with general keywords then specific terms are optimized in
% searches)
%
%% ------------------------------------------------------------------------ %%
\title{=enter title here=}
%% ------------------------------------------------------------------------ %%
%
% AUTHORS AND AFFILIATIONS
%
%% ------------------------------------------------------------------------ %%
% Authors are individuals who have significantly contributed to the
% research and preparation of the article. Group authors are allowed, if
% each author in the group is separately identified in an appendix.)
% List authors by first name or initial followed by last name and
% separated by commas. Use \affil{} to number affiliations, and
% \thanks{} for author notes.
% Additional author notes should be indicated with \thanks{} (for
% example, for current addresses).
% Example: \authors{A. B. Author\affil{1}\thanks{Current address, Antartica}, B. C. Author\affil{2,3}, and D. E.
% Author\affil{3,4}\thanks{Also funded by Monsanto.}}
\authors{=list all authors here=}
% \affiliation{1}{First Affiliation}
% \affiliation{2}{Second Affiliation}
% \affiliation{3}{Third Affiliation}
% \affiliation{4}{Fourth Affiliation}
\affiliation{=number=}{=Affiliation Address=}
%(repeat as many times as is necessary)
%% Corresponding Author:
% Corresponding author mailing address and e-mail address:
% (include name and email addresses of the corresponding author. More
% than one corresponding author is allowed in this LaTeX file and for
% publication; but only one corresponding author is allowed in our
% editorial system.)
% Example: \correspondingauthor{First and Last Name}{email@address.edu}
\correspondingauthor{=name=}{=email address=}
%% Keypoints, final entry on title page.
% List up to three key points (at least one is required)
% Key Points summarize the main points and conclusions of the article
% Each must be 100 characters or less with no special characters or punctuation and must be complete sentences
% Example:
% \begin{keypoints}
% \item List up to three key points (at least one is required)
% \item Key Points summarize the main points and conclusions of the article
% \item Each must be 100 characters or less with no special characters or punctuation and must be complete sentences
% \end{keypoints}
\begin{keypoints}
\item enter point 1 here
\item enter point 2 here
\item enter point 3 here
\end{keypoints}
%% ------------------------------------------------------------------------ %%
%
% ABSTRACT and PLAIN LANGUAGE SUMMARY
%
% A good Abstract will begin with a short description of the problem
% being addressed, briefly describe the new data or analyses, then
% briefly states the main conclusion(s) and how they are supported and
% uncertainties.
% The Plain Language Summary should be written for a broad audience,
% including journalists and the science-interested public, that will not have
% a background in your field.
%
% A Plain Language Summary is required in GRL, JGR: Planets, JGR: Biogeosciences,
% JGR: Oceans, G-Cubed, Reviews of Geophysics, and JAMES.
% see http://sharingscience.agu.org/creating-plain-language-summary/)
%
%% ------------------------------------------------------------------------ %%
%% \begin{abstract} starts the second page
\begin{abstract}
[ enter your Abstract here ]
\end{abstract}
\section*{Plain Language Summary}
[ enter your Plain Language Summary here or delete this section]
%% ------------------------------------------------------------------------ %%
%
% TEXT
%
%% ------------------------------------------------------------------------ %%
%%% Suggested section heads:
% \section{Introduction}
%
% The main text should start with an introduction. Except for short
% manuscripts (such as comments and replies), the text should be divided
% into sections, each with its own heading.
% Headings should be sentence fragments and do not begin with a
% lowercase letter or number. Examples of good headings are:
% \section{Materials and Methods}
% Here is text on Materials and Methods.
%
% \subsection{A descriptive heading about methods}
% More about Methods.
%
% \section{Data} (Or section title might be a descriptive heading about data)
%
% \section{Results} (Or section title might be a descriptive heading about the
% results)
%
% \section{Conclusions}
\section{= enter section title =}
%Text here ===>>>
%%
% Numbered lines in equations:
% To add line numbers to lines in equations,
% \begin{linenomath*}
% \begin{equation}
% \end{equation}
% \end{linenomath*}
%% Enter Figures and Tables near as possible to where they are first mentioned:
%
% DO NOT USE \psfrag or \subfigure commands.
%
% Figure captions go below the figure.
% Table titles go above tables; other caption information
% should be placed in last line of the table, using
% \multicolumn2l{$^a$ This is a table note.}
%
%----------------
% EXAMPLE FIGURES
%
% \begin{figure}
% \includegraphics{example.png}
% \caption{caption}
% \end{figure}
%
% Giving latex a width will help it to scale the figure properly. A simple trick is to use \textwidth. Try this if large figures run off the side of the page.
% \begin{figure}
% \noindent\includegraphics[width=\textwidth]{anothersample.png}
%\caption{caption}
%\label{pngfiguresample}
%\end{figure}
%
%
% If you get an error about an unknown bounding box, try specifying the width and height of the figure with the natwidth and natheight options. This is common when trying to add a PDF figure without pdflatex.
% \begin{figure}
% \noindent\includegraphics[natwidth=800px,natheight=600px]{samplefigure.pdf}
%\caption{caption}
%\label{pdffiguresample}
%\end{figure}
%
%
% PDFLatex does not seem to be able to process EPS figures. You may want to try the epstopdf package.
%
%
% ---------------
% EXAMPLE TABLE
%
% \begin{table}
% \caption{Time of the Transition Between Phase 1 and Phase 2$^{a}$}
% \centering
% \begin{tabular}{l c}
% \hline
% Run & Time (min) \\
% \hline
% $l1$ & 260 \\
% $l2$ & 300 \\
% $l3$ & 340 \\
% $h1$ & 270 \\
% $h2$ & 250 \\
% $h3$ & 380 \\
% $r1$ & 370 \\
% $r2$ & 390 \\
% \hline
% \multicolumn{2}{l}{$^{a}$Footnote text here.}
% \end{tabular}
% \end{table}
%% SIDEWAYS FIGURE and TABLE
% AGU prefers the use of {sidewaystable} over {landscapetable} as it causes fewer problems.
%
% \begin{sidewaysfigure}
% \includegraphics[width=20pc]{figsamp}
% \caption{caption here}
% \label{newfig}
% \end{sidewaysfigure}
%
% \begin{sidewaystable}
% \caption{Caption here}
% \label{tab:signif_gap_clos}
% \begin{tabular}{ccc}
% one&two&three\\
% four&five&six
% \end{tabular}
% \end{sidewaystable}
%% If using numbered lines, please surround equations with \begin{linenomath*}...\end{linenomath*}
%\begin{linenomath*}
%\begin{equation}
%y|{f} \sim g(m, \sigma),
%\end{equation}
%\end{linenomath*}
%%% End of body of article
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Optional Appendix goes here
%
% The \appendix command resets counters and redefines section heads
%
% After typing \appendix
%
%\section{Here Is Appendix Title}
% will show
% A: Here Is Appendix Title
%
%\appendix
%\section{Here is a sample appendix}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Optional Glossary, Notation or Acronym section goes here:
%
%%%%%%%%%%%%%%
% Glossary is only allowed in Reviews of Geophysics
% \begin{glossary}
% \term{Term}
% Term Definition here
% \term{Term}
% Term Definition here
% \term{Term}
% Term Definition here
% \end{glossary}
%
%%%%%%%%%%%%%%
% Acronyms
% \begin{acronyms}
% \acro{Acronym}
% Definition here
% \acro{EMOS}
% Ensemble model output statistics
% \acro{ECMWF}
% Centre for Medium-Range Weather Forecasts
% \end{acronyms}
%
%%%%%%%%%%%%%%
% Notation
% \begin{notation}
% \notation{$a+b$} Notation Definition here
% \notation{$e=mc^2$}
% Equation in German-born physicist Albert Einstein's theory of special
% relativity that showed that the increased relativistic mass ($m$) of a
% body comes from the energy of motion of the body—that is, its kinetic
% energy ($E$)—divided by the speed of light squared ($c^2$).
% \end{notation}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% ACKNOWLEDGMENTS
%
% The acknowledgments must list:
%
% >>>> A statement that indicates to the reader where the data
% supporting the conclusions can be obtained (for example, in the
% references, tables, supporting information, and other databases).
%
% All funding sources related to this work from all authors
%
% Any real or perceived financial conflicts of interests for any
% author
%
% Other affiliations for any author that may be perceived as
% having a conflict of interest with respect to the results of this
% paper.
%
%
% It is also the appropriate place to thank colleagues and other contributors.
% AGU does not normally allow dedications.
\acknowledgments
Enter acknowledgments, including your data availability statement, here.
%% ------------------------------------------------------------------------ %%
%% References and Citations
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% \bibliography{<name of your .bib file>} don't specify the file extension
%
% don't specify bibliographystyle
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\bibliography{ enter your bibtex bibliography filename here }
%Reference citation instructions and examples:
%
% Please use ONLY \cite and \citeA for reference citations.
% \cite for parenthetical references
% ...as shown in recent studies (Simpson et al., 2019)
% \citeA for in-text citations
% ...Simpson et al. (2019) have shown...
%
%
%...as shown by \citeA{jskilby}.
%...as shown by \citeA{lewin76}, \citeA{carson86}, \citeA{bartoldy02}, and \citeA{rinaldi03}.
%...has been shown \cite{jskilbye}.
%...has been shown \cite{lewin76,carson86,bartoldy02,rinaldi03}.
%... \cite <i.e.>[]{lewin76,carson86,bartoldy02,rinaldi03}.
%...has been shown by \cite <e.g.,>[and others]{lewin76}.
%
% apacite uses < > for prenotes and [ ] for postnotes
% DO NOT use other cite commands (e.g., \citet, \citep, \citeyear, \nocite, \citealp, etc.).
%
\end{document}
More Information and Advice:
%% ------------------------------------------------------------------------ %%
%
% SECTION HEADS
%
%% ------------------------------------------------------------------------ %%
% Capitalize the first letter of each word (except for
% prepositions, conjunctions, and articles that are
% three or fewer letters).
% AGU follows standard outline style; therefore, there cannot be a section 1 without
% a section 2, or a section 2.3.1 without a section 2.3.2.
% Please make sure your section numbers are balanced.
% ---------------
% Level 1 head
%
% Use the \section{} command to identify level 1 heads;
% type the appropriate head wording between the curly
% brackets, as shown below.
%
%An example:
%\section{Level 1 Head: Introduction}
%
% ---------------
% Level 2 head
%
% Use the \subsection{} command to identify level 2 heads.
%An example:
%\subsection{Level 2 Head}
%
% ---------------
% Level 3 head
%
% Use the \subsubsection{} command to identify level 3 heads
%An example:
%\subsubsection{Level 3 Head}
%
%---------------
% Level 4 head
%
% Use the \subsubsubsection{} command to identify level 3 heads
% An example:
%\subsubsubsection{Level 4 Head} An example.
%
%% ------------------------------------------------------------------------ %%
%
% IN-TEXT LISTS
%
%% ------------------------------------------------------------------------ %%
%
% Do not use bulleted lists; enumerated lists are okay.
% \begin{enumerate}
% \item
% \item
% \item
% \end{enumerate}
%
%% ------------------------------------------------------------------------ %%
%
% EQUATIONS
%
%% ------------------------------------------------------------------------ %%
% Single-line equations are centered.
% Equation arrays will appear left-aligned.
Math coded inside display math mode \[ ...\]
will not be numbered, e.g.,:
\[ x^2=y^2 + z^2\]
Math coded inside \begin{equation} and \end{equation} will
be automatically numbered, e.g.,:
\begin{equation}
x^2=y^2 + z^2
\end{equation}
% To create multiline equations, use the
% \begin{eqnarray} and \end{eqnarray} environment
% as demonstrated below.
\begin{eqnarray}
x_{1} & = & (x - x_{0}) \cos \Theta \nonumber \\
&& + (y - y_{0}) \sin \Theta \nonumber \\
y_{1} & = & -(x - x_{0}) \sin \Theta \nonumber \\
&& + (y - y_{0}) \cos \Theta.
\end{eqnarray}
%If you don't want an equation number, use the star form:
%\begin{eqnarray*}...\end{eqnarray*}
% Break each line at a sign of operation
% (+, -, etc.) if possible, with the sign of operation
% on the new line.
% Indent second and subsequent lines to align with
% the first character following the equal sign on the
% first line.
% Use an \hspace{} command to insert horizontal space
% into your equation if necessary. Place an appropriate
% unit of measure between the curly braces, e.g.
% \hspace{1in}; you may have to experiment to achieve
% the correct amount of space.
%% ------------------------------------------------------------------------ %%
%
% EQUATION NUMBERING: COUNTER
%
%% ------------------------------------------------------------------------ %%
% You may change equation numbering by resetting
% the equation counter or by explicitly numbering
% an equation.
% To explicitly number an equation, type \eqnum{}
% (with the desired number between the brackets)
% after the \begin{equation} or \begin{eqnarray}
% command. The \eqnum{} command will affect only
% the equation it appears with; LaTeX will number
% any equations appearing later in the manuscript
% according to the equation counter.
%
% If you have a multiline equation that needs only
% one equation number, use a \nonumber command in
% front of the double backslashes (\\) as shown in
% the multiline equation above.
% If you are using line numbers, remember to surround
% equations with \begin{linenomath*}...\end{linenomath*}
% To add line numbers to lines in equations:
% \begin{linenomath*}
% \begin{equation}
% \end{equation}
% \end{linenomath*}
